The Best Box Mods for Beginners

Between the technical terms and loads of features on some modern devices, vaping can be daunting to the uninitiated. As a newbie, it can be complicated and confusing to choose the right device. If this is your predicament, look no further because we’ll look at some of the best box mods for beginners in this post.

Before we look at the different types of box mods, it is essential to highlight the distinguishing features of this type of device. Box mods get their name from their box-like shape. This type of mods can pack a lot of batteries, and thus are more powerful than other vaping devices.

Box mods are arguably the most advanced type of vaping device. They support variable wattage and temperature setting as well as sub ohm vaping. Also, you can use different atomizers with a box mod.

As a beginner, a box mod is the type of device to get when you are looking to take your vaping to the next level. With that said, let us look at two of the best box mod devices for beginners.

Best Box Mods for Beginners

A. Eleaf Aster 75W TC Mod
As a beginner to vaping, high wattage levels should not be your primary concern. Instead, you need to look at getting a device that is safe, easy to use, and can provide sufficient power. One of the top mods that fit this criterion is the Eleaf Aster 75W TC Mod.

Eleaf makes some of the best vaping devices for beginners. The Aster is a simple mod that runs on a single 18650 battery and can fire up to 75 watts. Although this mod does not generate immense power, it comes with some of the features you will find in advanced mods like support for variable wattage, temperature control, TCR, and Bypass mode. The mod has a spring-loaded 510 connector on top of it. It can fit any atomizer with a diameter of 22mm or less without any overhang. The Eleaf Aster 75W Mod comes with many safety features including wattage and resistance lock, short circuit protection, dual circuit protection, temperature protection, reverse polarity protection, atomizer short protection, and more.


  • Dimension: 35.5mm by 23mm by 91mm
  • Wattage Range: 1 to 75W
  • Resistance Range: 0.05 to 1.5ohm (TC) and 0.1 to 3.5ohm (VW)
  • Temperature Range: 200 to 600 degrees Fahrenheit
  • Compatible with Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
  • Upgradeable firmware

B. Smok X-Priv Baby Box Mod
The Smok X-Priv Baby Box is a smaller version of the Smok X-Priv. This mod comes with most of the same features of its predecessor. The main difference between the original X-Priv and the X-Priv Baby Box is battery capacity.

The Smok X-Priv Baby Box comes with a built-in 2300mAh battery and has a wattage output of 80W. The mod has a beautiful design. There is a 2-inch color screen on the front of the mod. On the back, there is a nice honeycomb pattern. You will find the typical large firing bar that Smok uses for its devices on the side. The firing bar is very sleek and responsive. On top of the mod, there is a spring-loaded gold-plated 510 pin for attaching your atomizer. The X-Priv Baby Box supports TC as well as TCR.

The Smok X-Priv comes with the TFV12 Prince Baby tank, but you can fit on just about any atomizer with a diameter of 28mm or less on the device without any overhang.


  • Dimension: 68mm by 47mm by 29mm
  • Wattage Range: 1 to 80W
  • Resistance Range: 0.05 to 2ohm (TC) and 0.1 to 2.5ohm (VW)
  • Temperature Range: 200 to 600 degrees Fahrenheit
  • Compatible with Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
  • Upgradeable firmware

The Eleaf Aster 75W and the Smok X-Priv Baby Box are among the best box mod for beginners. These mods will allow you to enjoy the same features that are available on some of the most advanced vape kits on the market.

Apart from these two, there are many other equally good box mods on the market that are suitable for beginners. Check out to find more options.

Leave a Reply