Asmodus Minikin Boost 155W Mod Review

The Asmodus Minikin Boost 115W is another highly rated mod in the Minikin family. This is a go-to device for most vapers who own this mod. The Minikin Boost is also known as the Minikin V1.5. It has the same chassis shape as the original Minikin and the Minikin Reborn. However, it has a rubberized finish with a paint slash pattern that sets this mod apart from the others. The Minikin Boost also sports some improvements like the unique temperature control “curve” function, and it comes with a magnetic battery door. It costs up to $99.99 for this mod in some online vape stores but you can get it on Ultimate Vape Deals for just $59.99.

Although the Asmodus Minikin Boost 155W mod is slightly bigger than the original Minikin mod, it does not feel bulky in hand. This is not the largest mod you will find on the market that runs on dual 18650 batteries, but it is not the smallest either. The rubberized finish makes it easier to get a tight grip on the mod. Overall, the finishing is well done and is one of the most impressive aspects of this device.

On top of the mod, you will find a stainless steel spring-loaded 510 connection for attaching your RDA or sub ohm tank. One of the perks of the increased size of the Minikin Boost is that it can fit any atty with a diameter of 25mm or below on this mod without even the slightest overhang.

As indicated earlier, the Minikin Boost is powered by dual 18650 batteries. To access the battery compartment of this mod, you have to pull off the back section. The battery door of this device comes with a magnetic lock, so you do not have to worry about it falling off. What’s more, it is interchangeable, so you can switch the appearance of your mod by replacing the battery door. This Asmodus mod has an impressively long battery life. Depending on how frequent you vape, you can go a whole day before you need to recharge. Under the mod, there are several holes to prevent the battery from overheating. This mod supports firmware upgrades. It comes with a micro USB cable for upgrading the firmware and for charging it.

On the front of the mod, you will find its big stainless steel firing button as well as an OLED screen below. The firing button of this mod is hard to miss. It is round and responsive. Also, there is no noise when you press it. The OLED screen on the Minikin Boost is quite clear. On the side of the mod, you will find two buttons for changing the settings.

Although the Asmodus Minikin Boost only produces 155 watts, it has some features that some more powerful mods lack. It runs on the GX155U-U chipset. You can choose between five different modes to vape using the Minikin Boost. They are normal wattage mode, temperature control mode, TCR mode, TFR mode, and temperature curve mode. In temperature curve mode, you can preset up to five different wattages for the mod to switch to in 10 seconds. This gives you absolute control to customize your vaping experience.

The mod can fire up to 155 watts in wattage mode, but it can only produce 120 watts in temperature control mode. The temperature range of this device is 212 to 572 degrees Fahrenheit. It is compatible with nickel, titanium, and stainless steel heating elements in temperature control mode. You can use any atomizer within a resistance range of 0.1 ohms to 2.5 ohms on the Minikin Boost.

The Asmodus Minikin Boost mod comes in different colors. You can get this mod with black splatter, inverted black splatter, purple splatter, and galaxy finish.

Check out Ultimate Vape Deals for many other unbelievable vaping deals.

Leave a Reply

Your email address will not be published. Required fields are marked *

Dog